3D Packaging Design: Streamlining Pre-Production and Saving Costs

06/12/2026

3D digital packaging design has moved from a niche capability to a competitive necessity in the packaging supply chain. The ability to create, review, and approve a structurally accurate 3D model of a package before any physical prototyp...

Atmospheric Glow Discharge Plasma for Packaging Film Surface Treatment

06/11/2026

Low-temperature plasma — specifically atmospheric-pressure uniform glow discharge — has emerged as one of the most effective technologies for modifying polymer film surfaces before printing, coating, or vacuum metallization. Unlike coron...

Chitosan in Packaging and Printing: Properties, Applications, and Potential

06/11/2026

Chitosan biopolymer for green packaging: film-forming, antimicrobial, biodegradable. Mechanical strength, gas barrier, dimensional stability, printability, produce film, meat wrap, specialty paper applications.

Skincare Anti-Counterfeiting Packaging: Three Structural Improvement Cases

06/11/2026

Anti-counterfeiting packaging for skincare products: three structural improvements — non-round bottle with indexed cap, one-time-use cap lock, double-cap structure with inner seal. Balancing security and ergonomics.

Plant-Extract Preservatives for Fresh Produce: Packaging Applications

06/11/2026

Plant-extract natural preservatives for fresh fruit and vegetable packaging: thymol cinnamaldehyde eugenol, chitosan synergy, impregnated corrugated board, edible coatings, dipping fumigation methods.

Special Print Effects: Metallic Inks, Offset-Screen Combo, and Foil

06/11/2026

Special print effects for packaging: gold-silver metallic inks, offset-screen combination printing, UV special effects, hot foil stamping, holographic, pearlescent, and fluorescent techniques.

Solventless Retort Adhesives: Performance, Patents, and Market Analysis

06/11/2026

Retort pouches — flexible packages that withstand steam sterilization at temperatures from 121°C to 145°C — rely on the adhesive layer as much as they rely on the barrier films. If the adhesive delaminates during retorting, the entire pa...

Polyacrylate Emulsion PSA: Modification, Performance, and Market Outlook

06/10/2026

Polyacrylate emulsion PSA: 65% market share in China, four adhesion forces, five modification methods (tackifier, silicone, reactive emulsifier, core-shell, high-solids), technology gap with Europe.

Stand-Up Pouch Production: Materials, Sealing, and Defect Solutions

06/10/2026

Stand-up pouch manufacturing: three-layer material selection, gusset bottom heat sealing, temperature-pressure-dwell parameters, leak and flatness defect troubleshooting, GB/T 1005-1998 testing.

PE Protective Film: Functional Coextrusion and Barrier Technology Trends

06/10/2026

PE protective film functionalization: antistatic, shrink, barrier, antimicrobial. Coextrusion blown vs cast film, 5-layer barrier lines, down-gauging to under 20 microns, market gap in China.

Offset vs Gravure vs Flexo: Choosing the Right Packaging Print Method

06/09/2026

Offset, gravure, and flexo for packaging: substrate range, quality comparison, run-length economics, water-based ink adoption, and which process fits which application.

Transparent Plastic Injection Molding: PMMA, PC, and PET Process Guide

06/09/2026

PMMA, PC, and PET transparent injection molding: melt temps, drying, mold design, annealing. Silver streaks, bubbles, flow marks, haze — defects and process fixes for optical clarity.

Digital Slitting Machines: 300-500 m/min, Intelligent Controls, and GFQ Series

06/09/2026

Digital slitting technology from 100 m/min manual to 500 m/min PLC-controlled machines. Dahua Little Prodigy II intelligent slitter, Dongguan jjspackage GFQ 200-500 m/min, Mitsubishi-Yaskawa control.

Ultrasonic Plastic Welding: Principles, Methods, and System Guide

06/09/2026

Ultrasonic plastic welding: 15-40 kHz vibration joins thermoplastics without adhesives. Six methods (melt, insert, rivet, spot, form, cut), PLL frequency tracking, half-wave horn design.

Offset vs Flexo Label Printing: Quality, Cost, and Substrate Guide

06/09/2026

Offset vs flexo for labels: offset 200-350 dpi vs flexo 170-180 dpi, plate costs, 30-40% equipment cost difference, substrate limits, UV curing, operator training comparison.