Print Surface Finishing: Abrasion Resistance Test Results

05/25/2026

GB/T 7705-2008 abrasion tests compare matte lamination, gloss film, varnish, foil stamping, and screen printing durability. See which finishing technique survives the most wear.

Wash-Aluminum Packaging Printing: Process Control Guide

05/25/2026

Master wash-aluminum packaging printing: varnish selection, registration control, and solvent management.

UV Curing Ink Storage: Six Rules Every Printer Must Follow

05/25/2026

UV ink spoils from light, heat, and time. Manage all three with temperature control, dark storage, FIFO rotation, filtration, and compatibility testing.

China Printing Equipment Trends: The Shift from Lead Type to Digital and What It Means for Global Buyers

05/25/2026

China's printing equipment exports grew 6.5x from 2003-2008. Learn how digitalization is reshaping the industry from CTP to inkjet.

Pad Printing Explained: How the Transfer Process Works and the Five Elements You Need

05/25/2026

Pad printing uses a silicone pad to transfer ink from an etched plate to curved, irregular surfaces.

Proofing vs. Production Printing: Five Ways to Close the Gap

05/25/2026

The proof looks perfect but the press run doesn't match. Fix it with color sequence alignment, paper matching, wet-on-wet trapping, and press calibration.

Pressure-Sensitive Label Printing: Paper vs Film — Process, Materials, and the Critical Decisions

05/25/2026

From seven-layer material structure to die-cutting, this guide covers paper and film pressure-sensitive label printing processes including surface treatment and ink drying methods.

Solvent-Based Gravure Ink: How Thixotropy, Flow, Viscosity, and Drying Control Your Print

05/24/2026

Solvent-based gravure ink properties control print quality. Learn how thixotropy, flow, viscosity, and drying rate interact and how to adjust each for a clean run.

Hot Foil Stamping Troubleshooting: 13 Problems and Their Fixes

05/24/2026

Hot foil stamping fails 13 common ways. From poor adhesion and reverse pulling to rough edges and color shift, here is the troubleshooting guide with matching foil grades and fixes for each.

Offset Printing and Lamination: Four Pressroom Decisions That Make or Break Bond Strength

05/24/2026

Lamination fails at the press more often than at the laminator. Control ink film, spray powder, drier level, and drying state for a bond that holds.

Gravure Printing Mottling: Why It Happens and Seven Ways to Fix It

05/24/2026

Mottling ruins gravure solids while highlights look perfect. Learn the four root causes from solvent speed to substrate surface and seven fixes that restore even ink density.

Soft Calender Printing: How It Works and Why It Beats Hard Calendering

05/24/2026

Soft calendering uses a heated hard roll against a polymer soft roll for smoother paper with better bulk. Learn the 8 advantages over hard calendering and the one limitation you must manage.

Reverse Printing Problem Solved: Three Fixes That Stop Ink Contamination Mid-Run

05/24/2026

Reverse printing turns yellow ink green and red ink purple. Fix it with solvent adjustment, higher speed, and better first-color adhesion and drying.

Liquid Flexible Packaging Film Printing: Six Things That Make or Break a Run

05/24/2026

Liquid pouch printing demands the right ink, film, and process control. From polyurethane ink selection to corona treatment and pressroom climate, here is what you need to get right.

Spot Color Ink Control: Four Factors That Shift Your Color and How to Lock Them Down

05/24/2026

Spot color drifts from ink film thickness, water balance, pressure, speed, and dry-back. Learn how each factor changes your color and how to keep them locked in.